HP ProLiant DL180 Gen9 Service Manual Download Page 106

Page: 106 / 130

Component identification 106

•

12-bay LFF hot-plug drive model

•

8-bay SFF hot-plug drive model

•

16-bay SFF hot-plug drive model

HP SmartDrive LED definitions

HP SmartDrives are the latest HP drive technology, and they are supported beginning with ProLiant Gen8

servers and server blades. The HP SmartDrive is not supported on earlier generation servers and server

blades. Identify an HP SmartDrive by its carrier, shown in the following illustration.
When a drive is configured as a part of an array and connected to a powered-up controller, the drive LEDs

indicate the condition of the drive.

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.

Summary of Contents for ProLiant DL180 Gen9



































































































































Search results

Summary of Contents for ProLiant DL180 Gen9

Reviews:

Brands by name

Popular brands

HP ProLiant DL180 Gen9, Service Manual

Search results

Summary of Contents for ProLiant DL180 Gen9

Reviews:

Brands by name

Popular brands