Removal and replacement procedures 33
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
28
).
o
Remove the server from the rack (on page
30
).
4.
Remove the access panel ("
Access panel
" on page
37
).
5.
If a full-length expansion board is installed on a PCI riser cage, remove the riser cage ("
Remove the PCI
riser cages
" on page
31
).
6.
Remove the air baffle.
Remove the fan cage
To remove the component:
1.
Power down the server (on page
27
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
28
).
o
Remove the server from the rack (on page
30
).
4.
Remove the access panel ("
Access panel
" on page
37
).
5.
Remove the air baffle (on page
32
).
6.
Disconnect the fan cables.
Summary of Contents for ProLiant DL180 Gen9
