manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 94 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 94

84    

Enhancements

Release M.10.09 Enhancements

N o t e s

■

You must configure the same VLANs that will be used for UDLD on all devices across the 
network; otherwise, the UDLD link cannot be maintained. 

■

If a VLAN ID is not specified, then UDLD control packets are sent out of the port as untagged 
packets. 

■

To re-assign a VLAN ID, re-enter the command with the new VLAN ID number. The new 
command will overwrite the previous command setting.

■

When configuring UDLD for tagged ports, you may receive a warning message if there are 
any inconsistencies with the port’s VLAN configuration (see page 

87

 for potential problems).

Viewing UDLD Information

The following show commands allow you to display UDLD configuration and status via the CLI. 

Syntax:

  show link-keepalive

Displays all the ports that are enabled for link-keepalive.

Syntax:

  show link-keepalive statistics

Displays detailed statistics for the UDLD-enabled ports on the switch. 

Syntax:

  clear link-keepalive statistics

Clears UDLD statistics. This command clears the packets sent, packets received, and 
transitions counters in the show link-keepalive statistics display.

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments