manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 89 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 89

    79

Enhancements

Release M.10.05 Enhancements

•

TC Flag Received

 counter shows the number of TC notifications (RSTP or MSTP style 

BPDU with the TC flag set) received on the port. 

•

TC ACK Flag Transmitted

 is an 802.1D mode counter. It will only increment when the port 

is operating in 802.1D mode and an 802.1D style PDU is sent out of the port. 

•

TC ACK Flag Received

 is an 802.1D mode counter. It will only increment when the port is 

operating in 802.1D mode and an 802.1D style PDU is received on the port. 

■

With STP and RSTP activated:

•

The 

show spanning tree detail

 command shows all active RSTP port by port.

•

The 

show spanning-tree 

<port-list>

 detail

 command shows the specified port-list RSTP 

port by port detail.

■

With MSTP activated:

•

The 

show spanning tree detail

 command shows all active MSTP port by port. This 

command only gives information concerning the common spanning tree (CST) ports. To 
view counters pertaining to a specific spanning-tree instance, you must use the 

show 

spanning-tree instance 

<inst>

 detail

 command. The 

show spanning-tree 

<port-list>

 detail

 

command shows the specified port-list MSTP port by port detail.

•

The 

show spanning-tree instance 

<inst>

 detail

 command shows all ports active for a 

specific instance of MSTP.

•

The 

show spanning-tree 

<port-list>

 instance 

<inst>

 detail shows the specified port-list for 

the specified instance of MSTP. 

•

TC ACK Flag Transmitted

 and 

TC ACK Flag Received

 are part of the CST counters displayed 

by the 

show spanning tree detail

 command. 

TC Detected

, 

TC Flag Transmitted

, and 

TC Flag 

Received

 are included only with the 

instance

 parameter due to the nature of MSTP.

Release M.10.05 Enhancements

Release M.10.05

 

includes the following enhancement:

■

Ping functionality now in conformance with RFC 2925 specification.

Release M.10.06 Enhancements

Release M.10.06

 

includes the following enhancement:

■

Enhancement (PR_1000330704) - Added RADIUS Command Authorization and Accounting 
for the Command Line Interface on 3400cl switch. Please refer to Chapter 6, RADIUS 
Authentication and Accounting in the 

Access Security Guide for the ProCurve Series 6400cl/

5300xl/4200vl/3400cl Switches

 (October 2005) for additional information.

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments