manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 77 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 77

    67

Enhancements

Release M.10.02 Enhancements

Causes of Client Deauthentication Immediately After Authenticating

■

ACE formatted incorrectly in the RADIUS server

•

“from”, “any”, or “to” keyword missing

•

An IP protocol number in the ACE exceeds 255.

•

An optional UDP or TCP port number is invalid.

■

A RADIUS-Based ACL limit has been exceeded. (Refer to 

Table 5, “Limits Affecting RADIUS-

Based ACL Applications”

 on page 

57

.)

•

The allowed maximum of one RADIUS-assigned ACL has already been reached on the 
port through which the deauthenticated client is trying to access the network. (Each 
client requiring a RADIUS-assigned ACL is a separate instance, even if multiple clients 
are assigned the same ACL.)

•

For a given port, the latest client authentication includes a RADIUS-Based ACL assign-
ment exceeding the maximum number of ACEs allowed on the port (30). 

ACE parsing error, destination IP, 

< ace-# >

 client 

< mac-address >

 port 

< port-# >

.

Notifies of a problem with the destination IP field in the 
indicated ACE of the access list for the indicated client on 
the indicated switch port.

ACE parsing error, tcp/udp ports, 

< ace-# >

 client 

< mac-address >

 port 

< port-# >

.

Notifies of a problem with the TCP/UDP port field in the 
indicated ACE of the access list for the indicated client on 
the indicated switch port.

Port 

< port-# >

, No RADIUS ACLs applied 

on this port.

Appears in response to the CLI 

show access-list radius 

< port-# >

 command when there is not currently a RADIUS 

ACL assigned to the port.

Rule limit per ACL exceeded. 

< ace-# >

 

client 

< mac-address >

 port 

< port-# >

.

Notifies that an ACL has too many rules. A maximum of 30 
(internal) ACEs are allowed per ACL. Refer to 

Table 5 on 

page 57

.

Duplicate mac. An ACl exists for 
client. Deauthenticating second. 
client 

< mac-address >

 port 

< port-# >

.

Notifies that an ACL for this mac on this port already exists.

Invalid Access-list entry length, 
client 

< mac-address >

 port 

< port-# >

.

Notifies that the string configured for an ACE entry on 
the Radius server exceeds 80 characters.

Memory allocation failure for IDM 
ACL.

Notifies of a memory allocation failure for a RADIUS-based 
ACL.

User Action?

ACE limit per port exceeded. client 

< mac-address >

 port 

< port-# >

.

Notifies that the maximum number of ACEs (30) allowed on 
the port was exceeded. 

Exceeded counter per port limit. 
client 

< mac-address >

 port 

< port-# >

.

Notifies that the internal counter (cnt) limit of 32 per port 
was exceeded on port 

< port-# >

. Refer to 

Table 5 on page 57

.

Message

Meaning

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments