manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 174 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 174

164    

Software Fixes in Release M.08.51 - M.10.72

Release M.10.17

■

DHCP Protection (PR_1000360273)

 — DHCP Lease renewal packets received on an 

untrusted port are dropped.

■

DHCP Protection (PR_1000360254)

 — An entry with an expired lease is not removed 

from the binding table.

■

Link Failure (PR_1000361488)

 — The J8440B version 10-GbE X2-CX4 may not initialize 

correctly, causing link failure. 

■

Selftest Failure (PR_1000360970)

 — A 10-GbE CX4 module (J8434A) will fail selftest 

following power cycle or software update if it is connected to another switch that is running 
spanning-tree. 

Release M.10.17 

Problems Resolved in Release M.10.17 

■

Crash  (PR_1000367036) 

— When a transceiver or mini-GBIC is hot-swapped the switch 

may crash with a message similar to the following.   

Software exception at buffers.c:2238 -- in 'mPpmgrCtrl', 

task ID = 0x6351358 -> ASSERT:  failed 

■

Enhancement (PR_1000346164)

 — RSTP/MSTP BPDU Protection enhancement. See 

“Spanning Tree BPDU Protection” on page 91

 for details.

Release M.10.18 - Release M.10.19

Releases M.10.18 and M.10.19 were never built.

Release M.10.20 

Problems Resolved in Release M.10.20

■

10-GbE <no PR> — 

Resolution for failure to initialize the 10-GbE link in port 26 of the 

ProCurve 3400cl-24G switch, or port 50 of the ProCurve 3400cl-48G switch, after update to 
software version M.10.17. See 

“Known Issues” on page 24

 for additional information.

■

Enhancement (PR_1000355089) —

 This enhancement increases the maximum number 

of 802.1X users per port to 8. 

■

Enhancement (PR_1000355877)

 — 802.1X Controlled Directions enhancement. With this 

change, Administrators can use “Wake-on-LAN” with computers that are connected to ports 
configured for 802.1X authentication.

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments