manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 142 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 142

132    

Enhancements

Release M.10.43 Enhancements

Adding a Static Binding

To add the static configuration of an IP-to-MAC binding for a port to the lease database, enter the 

ip 

source-binding 

command at the global configuration level. Use the 

no 

form of the command to remove 

the IP-to-MAC binding from the database.

N o t e

Note that the 

ip source-binding 

command is the same command used by the Dynamic ARP Protection 

feature to configure static bindings. The Dynamic ARP Protection and Dynamic IP Lockdown features 
share a common list of source IP-to-MAC address bindings.

Verifying the Dynamic IP Lockdown Configuration

To display the ports on which dynamic IP lockdown is configured, enter the 

show ip source-lockdown 

status

 command at the global configuration level. 

Syntax:

[no] ip source-binding <

vlan-id

> <

ip-address

> <

mac-address

> <

port-

number

>

vlan-id

Specifies a valid VLAN ID number to bind with 
the specified MAC and IP addresses on the port 
in the DHCP binding database.

ip-address

Specifies a valid client IP address to bind with a 
VLAN and MAC address on the port in the DHCP 
binding database.

mac-address

Specifies a valid client MAC address to bind with 
a VLAN and IP address on the port in the DHCP 
binding database.

port-number

Specifies the port number on which the IP-to-
MAC address and VLAN binding is configured in 
the DHCP binding database.

Syntax:

show ip source-lockdown status

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments