manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 87 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 87

    77

Enhancements

Release M.10.04 Enhancements

N o t e

The 

router rip

 command exists in previous software versions. In this implementation, however, RIP 

must be enabled in order to open the port on the switch.

Enabling/Disabling Stacking

To enable/disable stacking, use the following command.

N o t e

The 

stack

 command exists in previous software versions. In this implementation, however, both 

stacking and SNMP must be enabled to open the port on the switch. If either feature is disabled, the 
port will remain closed.

Spanning Tree Show Commands 

The 

show spanning-tree detail

 command previously displayed 802.1D (STP) and 802.1w (RSTP) status 

and counters for all ports on the switch. Beginning with software release M.10.04, this command 
provides 802.1s (MSTP) multi-instance spanning tree details and displays additional parameters to   
enhance spanning-tree reporting via the CLI. 

Syntax:

  [no] stack

Enables stacking (SNMP) on the switch. (Default: disabled)

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments