manualshive.com logo in svg

HP ProCurve Series 3400cl, Release Notes, Page: 118 / 197

Share
Download
HP ProCurve Series 3400cl Release Notes Download Page 118

108    

Enhancements

Release M.10.34 Enhancements

Release M.10.34 Enhancements

Release M.10.34

 

includes the following enhancement:

■

Enhancement (PR_1000412747)

 — Single Sign-on for Administrators

Concurrent TACAS+ and SFTP

It is now possible to have SFTP/SCP sessions run concurrently with  authentication. 
Because the initial login must be with a username/password that has manager level privileges, you 
must configure single sign--on in order for  and SFTP/SCP to coexist. 

To configure  single sign-on, user the 

aaa authentication login privilege-mode

 command.

3. If you disable the use of dynamic VLANs in an 
authentication session using the 

no aaa port-access gvrp-vlans

 

command, client sessions that were authenticated with a 
dynamic VLAN continue and are not deauthenticated.

(This behavior differs form how static VLAN assignment is 
handled in an authentication session. If you remove the 
configuration of the static VLAN used to create a temporary 
client session, the 802.1X, MAC, or Web authenticated client 
is deauthenticated.)

However, if a RADIUS-configured dynamic VLAN used for 
an authentication session is deleted from the switch through 
normal GVRP operation (for example, if no GVRP 
advertisements for the VLAN are received on any switch 
port), authenticated clients using this VLAN are 
deauthenticated. 

For information on how static and dynamic VLANs are 
assigned in a RADIUS-based 802.1X, MAC, or Web 
authentication session, refer to the “How RADIUS-Based 
Authentication Affects VLAN Operation” section in the 
“RADIUS Authentication and Accounting” chapter of the 
Access Security Guide.

Syntax:

aaa authentication

<

login [privilege-mode] >

Selects the Operator access level. If the 

privilege-mode

 option is entered, 

is enabled for a single login. The authorized privilege level 
(Operator or Manager) is granted by the  server. 

Default: Single login disabled.

Summary of Contents for ProCurve Series 3400cl






































































































































































































Reviews:

No comments