manualshive.com logo in svg

HP ProBook 430 G7, Maintenance And Service Manual

Share
Download
HP ProBook 430 G7 Maintenance And Service Manual Download Page 89

Keyboard/top cover

The top cover with keyboard remains after removing all other spare parts from the computer.

If replacing the keyboard/top cover, be sure to remove the weight from the old top cover and install in the 
new top cover, as shown in the following steps:

1.

Remove the Phillips M2.0 × 3.0 screw (1) that secures the weight to the computer.

2.

Remove the weight from the computer (2).

In the following, the first table provides the main spare part number for the keyboards. The second table 
provides the country codes.

Table 5-18

  Keyboard/top cover descriptions and part numbers

Description

Spare part number

Keyboard/top cover, no backlight

L44548-xx1

Keyboard/top cover, backlit

L44547-xx1

Keyboard/top cover, backlit, privacy

L79183-xx1

Table 5-19

  Spare part country codes

For use in country 
or region

Spare part 
number

For use in country 
or region

Spare part 
number

For use in country 
or region

Spare part 
number

Belgium

-A41

Iceland

-DD1

Slovenia

-BA1

Brazil

-201

India

-D61

South Korea

-AD1

Bulgaria

-261

Israel

-BB1

Spain

-071

Chile

-161

Italy

-061

Switzerland

-BG1

Component replacement procedures

81

Summary of Contents for ProBook 430 G7























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands