manualshive.com logo in svg

HP ProBook 430 G7, Maintenance And Service Manual

Share
Download
HP ProBook 430 G7 Maintenance And Service Manual Download Page 52

Hard drive

Table 5-7

  Hard drive descriptions and part numbers

Description

Spare part number

Hard, drive, 1 TB, 5400 rpm, 7 mm

832077-002

Hard drive, 500 GB, 7200 rpm, 7 mm

703267-002

Hard Drive Hardware Kit (includes hard drive cover and connector)

L44510-001

Before removing the hard drive, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 34

).

2.

Place the computer in Battery Safe mode (

Battery Safe mode on page 34

).

3.

Remove the bottom cover (

Bottom cover on page 36

).

4.

Remove the battery (

Battery on page 35

).

Remove the hard drive:

1.

Release the ZIF connector (1), and then disconnect the hard drive cable from the system board (2).

2.

Remove the two Phillips M2.0 × 4.0 screws (3) that secure the hard drive to the computer.

3.

Use the tab to lift the hard drive from the bay (4).

44

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ProBook 430 G7























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands