manualshive.com logo in svg

HP ProBook 430 G7, Maintenance And Service Manual

Share
Download
HP ProBook 430 G7 Maintenance And Service Manual Download Page 29

Table 3-2

  Display components and their descriptions (continued)

Item

Description

Spare part number

 

Camera module (includes bezel adhesive and rear cover adhesive)

 

(3)

HD camera

L78049-001

(4)

HD + IR camera

L78050-001

 

Microphone board (not illustrated)

L44541-001

(5)

Display/camera cable assembly (models with an HD camera or privacy display; included in the 
Display Cable Kit; includes bezel adhesive and rear cover adhesive)

L77235-001

(6)

Display/camera cable assembly (models with an HD + IR camera; included in the Display Cable 
Kit; includes bezel adhesive and rear cover adhesive)

L77235-001

(7)

WWAN antennas (includes bezel adhesive and rear cover adhesive)

L78052-001

(8)

WLAN antennas (includes bezel adhesive and rear cover adhesive)

L78051-001

(9)

Hinge Kit, left and right (includes bezel adhesive and rear cover adhesive)

L77233-001

(10)

Display rear cover (includes wireless antennas and bezel adhesive)

 

 

Models with WLAN, without WWAN, and with an HD camera

L78055-001

 

Models with WLAN, WWAN, and an HD camera

L78056-001

 

Models with an HD + IR camera

L78058-001

 

Models with a privacy display

L78057-001

 

Camera privacy cover (not illustrated)

L77237-001

Display components, nontouch models

21

Summary of Contents for ProBook 430 G7























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands