manualshive.com logo in svg

HP ProBook 430 G7, Maintenance And Service Manual

Share
Download
HP ProBook 430 G7 Maintenance And Service Manual Download Page 58

Power/USB board

Table 5-11

  Power/USB board description and part number

Description

Spare part number

Power/USB board

L77227-001

Power/USB board cable (included in Cable Kit)

L81305-001

Before removing the power/USB board, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 34

).

2.

Place the computer in Battery Safe mode (

Battery Safe mode on page 34

).

3.

Remove the bottom cover (

Bottom cover on page 36

).

4.

Remove the battery (

Battery on page 35

).

Remove the power/USB board:

1.

Disconnect the cable from the ZIF connector on the power/USB board (1).

2.

Remove the two Phillips M2.0 × 4.0 screws (2) that secure the board to the computer.

3.

Lift the rear of the board up, and then pull the board away from the connector and out of the computer 
to remove it (3).

Reverse this procedure to install the power/USB board.

50

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ProBook 430 G7























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands