M.2 solid-state drive
Table 5-6
Solid-state drive descriptions and part numbers
Description
Spare part number
512 GB, PCIe, TLC
L78043-001
512 GB, PCIe
L78044-001
512 GB, PCIe + 32 GB Optane memory
L85513-001
256 GB, PCIe
L78042-001
256 GB, PCIe + 16 GB Optane memory
L85341-001
128 GB, SATA-3, TLC
L78041-001
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 34
).
2.
Place the computer in Battery Safe mode (
).
3.
Remove the bottom cover (
4.
Remove the battery (
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the computer.
2.
Remove the solid-state drive (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
Component replacement procedures
43
