HP ProBook 4230s Maintenance And Service Manual Download Page 22

Page: 22 / 114

Left

Component

Description

(1)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a

deterrent, but it may not prevent the computer from being
mishandled or stolen.

(2)

RJ-11 (modem) jack (select models only)

Connects a modem cable.

(3)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.

(4)

External monitor port

Connects an external VGA monitor or projector.

(5)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or audio
component.

(6)

SuperSpeed 3.0 USB port

Connects an optional USB device.

Chapter 2 External component identification

Summary of Contents for ProBook 4230s



















































































































Search results

Summary of Contents for ProBook 4230s

Reviews:

Related manuals for ProBook 4230s

Brands by name

Popular brands

HP ProBook 4230s, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 4230s

Reviews:

Related manuals for ProBook 4230s

Brands by name

Popular brands