HP ProBook 4230s Maintenance And Service Manual Download

Page: 63 / 114

Position the computer upright and open it as far as possible.

Using a slim screwdriver, release the four top keyboard tabs at the indicated locations and lift the
top of the keyboard up and place it on the palm rest.

Lift the keyboard connector latch and disconnect the keyboard cable from the system board.

Remove the keyboard from the computer.

Reverse this procedure to install the keyboard.

Top cover

Description

Spare part number

Top cover for use in models with USB 3.0 and a fingerprint reader

646041-001

Top cover for use in models with USB 3.0 and without a fingerprint reader

646047-001

Top cover with a fingerprint reader slot insert for use in computers that do not support a fingerprint
reader

657232-001

Top cover for use in computers with USB 2.0 and a fingerprint reader

657960-001

Top cover for use in computers with USB 2.0 and without a fingerprint reader

657961-001

Top cover with no USB logo for use in USB 2.0 or USB 3.0 computers with a fingerprint reader

666893-001

Top cover with no USB logo for use in USB 2.0 or USB 3.0 computers without a fingerprint reader

666894-001

Component replacement procedures

Summary of Contents for ProBook 4230s



















































































































Search results

Summary of Contents for ProBook 4230s

Reviews:

Related manuals for ProBook 4230s

Brands by name

Popular brands

HP ProBook 4230s, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 4230s

Reviews:

Related manuals for ProBook 4230s

Brands by name

Popular brands