4.
Remove the five Phillips PM2.5×8.0 screws
(2)
from the hinges, the Phillips PM2.5×8.0 screw
(3)
from the security bracket, and then lift the display from the computer
(4)
.
When installing the display assembly, be sure that the wireless antenna cables are routed and
arranged properly.
Failure to properly route the antennas can result in degradation of the computer's WLAN and
WWAN performance.
5.
To replace the display bezel, remove the two rubber screw covers and the two Phillips
PM2.5×5.0 screws
(1)
in the bottom corners of the display bezel.
6.
Flex the bottom
(2)
of the bezel, the inside edges of the left and right sides
(3)
, and then the top
(4)
of the bezel until it disengages from the display enclosure.
The bezel is available using the following spare part numbers:
646015-001: models without a webcam
646014-001: models with a webcam
7.
The hinge covers
(5)
slide off the hinges when you remove the bezel.
The hinge covers are available using spare part number 646043-001
8.
Remove the display bezel.
Component replacement procedures
75
