HP ProBook 4230s Maintenance And Service Manual Download

Page: 21 / 114

Front

Component

Description

(1)

Drive light

●

Blinking white: The hard drive is being accessed.

●

Amber: HP 3D DriveGuard has temporarily parked the hard
drive.

(2)

Media Card Reader

Supports the following digital card formats:

●

Memory Stick Pro

●

Memory Stick Duo Pro

●

MultiMediaCard

●

MultiMediaCard Micro

●

Secure Digital (SD) Card

●

Secure Digital (SD) Card Micro

(3)

Speakers (2)

Produce sound.

(4)

Audio-out (headphone) jack

Connects optional headphones, earbuds, a headset, or television
audio.

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the

Regulatory, Safety,

and Environmental Notices

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

(5)

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.

Front

Summary of Contents for ProBook 4230s



















































































































Search results

Summary of Contents for ProBook 4230s

Reviews:

Related manuals for ProBook 4230s

Brands by name

Popular brands

HP ProBook 4230s, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 4230s

Reviews:

Related manuals for ProBook 4230s

Brands by name

Popular brands