Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket and screws.
Description
Spare part number
750-GB, 7200-rpm hard drive
633252-001
640-GB, 5400-rpm hard drive
603785-001
500-GB, 7200-rpm hard drive
634926-001
500-GB, 5400-rpm hard drive
634638-001
320-GB, 7200-rpm hard drive
634862-001
320-GB, 5400-rpm hard drive
645193-001
250-GB, 7200-rpm hard drive
634861-001
250-GB, 5400-rpm hard drive
645191-001
Hard Drive Hardware Kit (includes hard drive bracket, insulator, and screws)
646046-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
).
5.
Remove the access door (see
Access door on page 43
).
Remove the hard drive:
1.
Position the computer upside-down with the front toward you.
2.
Disconnect the hard drive cable from the system board
(1)
.
3.
Remove the four Phillips PM2.0×4.0 screws
(2)
that secure the hard drive to the computer.
4.
Lift the hard drive
(3)
from the hard drive bay far enough to access the hard drive cable.
44
Chapter 4 Removal and replacement procedures
