manualshive.com logo in svg

HP ProBook 11 G2 Education Edition, Maintenance And Service Manual

The HP ProBook 11 G2 Education Edition is a durable and versatile laptop designed for educational environments. To ensure smooth operation and maximize its lifespan, it is crucial to have the Maintenance and Service Manual readily available. Download this comprehensive manual for free at manualshive.com, empowering you with valuable insights on troubleshooting and maintenance procedures.

Share
Download
background image

About the boot device order .............................................................................................................  71
Choosing MultiBoot preferences ....................................................................................................... 71

Setting a new boot order in Computer Setup ................................................................. 72
Dynamically choosing a boot device using the f9 prompt .............................................  72
Setting a MultiBoot Express prompt ..............................................................................  72
Entering MultiBoot Express preferences ........................................................................  73

9  Computer Setup (BIOS) and MultiBoot – Windows 7 ......................................................................................... 74

Using Computer Setup ......................................................................................................................................... 74

Starting Computer Setup ..................................................................................................................  74
Navigating and selecting in Computer Setup ...................................................................................  74
Restoring factory settings in Computer Setup .................................................................................  75
Updating the BIOS .............................................................................................................................  76

Determining the BIOS version ......................................................................................... 76
Downloading a BIOS update ...........................................................................................  76

Using MultiBoot ...................................................................................................................................................  77

About the boot device order .............................................................................................................  77
Choosing MultiBoot preferences ....................................................................................................... 77

Setting a new boot order in Computer Setup ................................................................. 77
Dynamically choosing a boot device using the f9 prompt .............................................  78
Setting a MultiBoot Express prompt ..............................................................................  78
Entering MultiBoot Express preferences ........................................................................  78

10  Using HP PC Hardware Diagnostics (UEFI) ..................................................................................................... 80

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ....................................................................  80

11  Backing up, restoring, and recovering in Windows 10 .................................................................................... 82

Creating recovery media and backups ................................................................................................................  82

Creating HP Recovery media (select products only) ......................................................................... 82

Using Windows tools ...........................................................................................................................................  83
Restore and recovery ........................................................................................................................................... 84

Recovering using HP Recovery Manager ........................................................................................... 84

What you need to know before you get started ............................................................. 84
Using the HP Recovery partition (select products only) ................................................. 85
Using HP Recovery media to recover .............................................................................. 85
Changing the computer boot order ................................................................................  86
Removing the HP Recovery partition (select products only) .........................................  86

12  Backup and recovery in Windows 8 ..............................................................................................................  87

Backing up your information ............................................................................................................................... 87

vii

Summary of Contents for ProBook 11 G2 Education Edition




















































































































Reviews:

No comments

Related manuals for ProBook 11 G2 Education Edition

Gigabyte Q2550 User Manual preview
Q2550
Brand: Gigabyte Pages: 11

Brands by name

Popular brands

Load more brands