6
Removal and replacement procedures for
Authorized Service Provider parts
CAUTION:
Components described in this chapter should only be accessed by an authorized service provider.
Accessing these parts can damage the computer and void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to
, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service label at the bottom of your computer. See
Locating the model number, serial number,
product number, and warranty information on page 12
for details.
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
There are as many as 65 screws that must be removed, replaced, and/or loosened when servicing the
Authorized Service Provider only parts. Make special note of each screw size and location during removal and
replacement.
Bottom cover
Description
Spare part number
Bottom cover (includes rubber feet, shielding, and vent)
846981–001
Before removing the bottom cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
).
Remove the bottom cover:
1.
Remove the following plugs that conceal the bottom cover screws:
(1) Four plugs in the corners of the computer
(2) Two plugs on the front edge of the computer
(3) Two plugs in the middle of the computer
The bottom cover screw covers are included in the Rubber Kit, spare part number 809868-001.
26
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
