manualshive.com logo in svg

HP ProBook 11 G2 Education Edition, Maintenance And Service Manual

The HP ProBook 11 G2 Education Edition is a durable and versatile laptop designed for educational environments. To ensure smooth operation and maximize its lifespan, it is crucial to have the Maintenance and Service Manual readily available. Download this comprehensive manual for free at manualshive.com, empowering you with valuable insights on troubleshooting and maintenance procedures.

Share
Download
background image

4.

Remove the fan/heat sink assembly (3).

NOTE:

The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly 

and the system board each time the fan/heat sink assembly is removed. Thermal material is used on the 
processor (1) and the fan/heat sink assembly section (2) that services it.

Reverse this procedure to install the fan/heat sink assembly.

Component replacement procedures

59

Summary of Contents for ProBook 11 G2 Education Edition




















































































































Reviews:

No comments

Related manuals for ProBook 11 G2 Education Edition

Brands by name

Popular brands

Load more brands