manualshive.com logo in svg

HP ProBook 11 G2 Education Edition, Maintenance And Service Manual

The HP ProBook 11 G2 Education Edition is a durable and versatile laptop designed for educational environments. To ensure smooth operation and maximize its lifespan, it is crucial to have the Maintenance and Service Manual readily available. Download this comprehensive manual for free at manualshive.com, empowering you with valuable insights on troubleshooting and maintenance procedures.

Share
Download
background image

6.

Remove the four Phillips PM2.5×5.8 screws (6) that secure the display assembly to the base enclosure.

7.

Partially open the computer.

8.

Swing the display hinges (1) to the open position.

9.

Slide the display assembly (2) forward until the display hinges are clear of the base enclosure.

10.

Remove the display assembly (3).

NOTE:

Steps 11 through 18 apply only to computer models equipped with a non-TouchScreen 

display assembly.

38

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ProBook 11 G2 Education Edition




















































































































Reviews:

No comments

Related manuals for ProBook 11 G2 Education Edition

KOCASO NB1400A User Manual preview
NB1400A
Brand: KOCASO Pages: 35

Brands by name

Popular brands

Load more brands