manualshive.com logo in svg

HP ProBook 11 G2 Education Edition, Maintenance And Service Manual

The HP ProBook 11 G2 Education Edition is a durable and versatile laptop designed for educational environments. To ensure smooth operation and maximize its lifespan, it is crucial to have the Maintenance and Service Manual readily available. Download this comprehensive manual for free at manualshive.com, empowering you with valuable insights on troubleshooting and maintenance procedures.

Share
Download
background image

Description

Spare part number

Description

Spare part number

For use in Belgium

849848-A41

For use in Latin America

849848-161

For use in Canada

849848-DB1

For use in the Netherlands

849848-B31

For use in Denmark, Finland, 
and Norway

849848-DH1

For use in Russia

849848-251

For use in France

849848-051

For use in Spain

849848-071

For use in Germany

849848-041

For use in Switzerland

849848-BG1

For use in Italy

849848-061

For use in the United Kingdom

849848-031

For use in Japan

849848-291

For use in the United States

849848-001

Before removing the keyboard/top cover, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 24

).

5.

Remove the bottom cover (see 

Bottom cover on page 26

).

6.

Remove the hard drive (see 

Hard drive on page 28

).

NOTE:

When replacing the keyboard/top cover, be sure that the power button board (see 

Power button 

board on page 51

) is removed from the defective keyboard/top cover and installed on the replacement 

keyboard/top cover.

Remove the keyboard/top cover:

1.

Release the ZIF connector (1) to which the keyboard cable is attached, and then disconnect the keyboard 
cable from the system board.

48

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ProBook 11 G2 Education Edition




















































































































Reviews:

No comments

Related manuals for ProBook 11 G2 Education Edition

Brands by name

Popular brands

Load more brands