Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers, cables, and four rubber isolators)
809870-001
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a.
Bottom cover (see
)
b.
Hard drive (see
)
c.
WWAN module (see
)
d.
Keyboard/top cover (see
e.
System board (see
Remove the speakers:
1.
Release the speaker cable from the routing clip (1) built into the base enclosure.
2.
Remove the two Phillips PM2.0×5.5 shoulder screws (2) that secure the speakers to the base enclosure.
3.
Remove the speakers (3).
NOTE:
When removing the speakers, make note of the location of the four rubber isolators. Removal
of or damage to these isolators can cause degradation to speaker performance.
Component replacement procedures
61
