HP P9000, Reference Manual

Page: 348 / 399

Table 152 Path Set Structure (continued)
Description REXX variables
The number of physical paths from the primary site to the
secondary site set in the storage system (
0
to
8
)
0 Setting
The number of defined physical paths from the secondary
site to the primary site (
0
to
8
)
0 S2P
Status of a logical path
Status
3
n
The target port number of the primary site of the logical
path (on the storage system indicated by
Pri.SerialNum
)
port Pri
The initiator port number of the secondary site of the
logical path (on the storage system indicated by
Sec.SerialNum
)
port Sec
The number of physical paths from the secondary site to
the primary site set in the storage system (
0
to
8
)
0 Setting
1 These variables are valid when the n
.type
value is
DKC
.
2 These variables are valid when the n
.type
value is
CU
.
3 When the
YKLOAD
command is executed, values are loaded from the configuration file and set as REXX variables.
When the
YKQRYPTH
command is executed, REXX variables are updated.
FlashCopy Information Structure
Table 153 (page 348) shows the FlashCopy information structure. The prefix for the name of the
FlashCopy information structure is stem-name-specified-in-STEM-parameter. Each REXX variable is
preceded by a period (
. ).
Table 153 FlashCopy Information Structure
Description REXX variables
Existence of FlashCopy information structure (
Valid
)
Info
1
Hardware information
State0 Source
Hardware information
State1
Hardware information
State2
Hardware information
State3
Hardware information
State4
Hardware information
State5
Hardware information
State6
Hardware information
State7
Existence of a FlashCopy relationship:
•
0
: No
•
1
: Yes (copying)
State0 Target
Existence of a FlashCopy in COPY mode relationship:
•
0
: No
•
1
: Yes (Copying in COPY mode)
State1
Existence of a FlashCopy in NOCOPY mode relationship:
•
0
: No (No FlashCopy in NOCOPY mode)
•
1
: Yes (FlashCopy in NOCOPY mode exists)
State2
348 Data Objects