HP P9000, Reference Manual

Page: 373 / 399

reached before the specified status is obtained or if an invalid status results, the error action is
executed. For details on invalid statuses, see
“Invalid Status for Each Value Specifiable in the
GOTO Parameter” (page 211) .
{DUPLEX|SUSPEND|SIMPLEX|SUSPVS|HOLD}
Specifies the status of the copy group that is specified in the
GOTO
parameter of the
YKEWAIT
command. After all copy pairs in the copy group have changed to the specified status, the
processing terminates normally. For details on this value, see the description of the
GOTO
parameter
in “YKEWAIT Command” (page 209) .
timeout-value ~ <numeric characters> ((0 to 9999))
Specifies (in minutes) the timeout value that is specified in the
TIMEOUT
parameter in the
YKEWAIT
command. If you omit this value, the value specified for the
WAITTIMEOUT
parameter in the
YKMONOPT
file is used. For details on this value, see the description of the
TIMEOUT
parameter
in “YKEWAIT Command” (page 209) .
RESYNC
(copy-group-ID,command-wait-time[,command-parameter])
Executes the
YKRESYNC
command with the specified command parameter on the specified copy
group after the specified command wait time elapses.
command-wait-time ~ <numeric character>((0 to 9999))
Specifies in minutes the wait time before the
YKRESYNC
command is executed.
command-parameter ~ <up to 256 characters of command parameter string>
Specifies the
YKRESYNC
command parameters. The
STEM
and
MSG
parameters are ignored even
if they are specified. For details on the specifiable parameters, see the description of parameters
in
“YKRESYNC Command” (page 239) .
SUSPEND
(copy-group-ID[,command-parameter])
Executes the
YKSUSPND
command with the specified command parameters on the specified copy
group.
command-parameter ~ <up to 256 characters of command parameter string>
Specifies the parameters of the
YKSUSPND
command. The
STEM
and
MSG
parameters are ignored
even if they are specified. For details on the specifiable parameters, see the description of
parameters in
“YKSUSPND Command” (page 251) .
In addition to the parameters that can be specified in the
YKSUSPND
command, the following
OFFSET
parameter can also be specified:
OFFSET(mmmm:ss)
Executes a suspension using the
ATTIME
suspend function at the time obtained by adding the
offset value to the
YKSUSPND
command execution time. The
ATTIME
parameter is valid when it
is specified at the same time as the
YKSUSPND
command.
If you specify
OFFSET
, you must specify the
WAITFOR
action of the
SUSPEND
specification for the
subsequent action. If the
WAITFOR
action of the
SUSPEND
specification is not specified for the
subsequent action and the
OFFSET
value is greater than the cycle time, during the next cycle, the
SUSPEND
action of the
OFFSET
specification will be executed.
mmmm ~ <numeric characters>((0000 to 9999))
Specifies the offset value in minutes.
ss ~ <numeric characters>((00 to 99))
Specifies the offset value in seconds.
DELETE
(copy-group-ID)
Executes the
YKDELETE
command on the specified copy group.
MAKE
(copy-group-ID[,command-parameter])
YKMONCG File 373