HP P9000, Reference Manual

Page: 36 / 399

Figure 22 CU Selection List for Remote Storage System Panel
Table 16 (page 36) describes the items in the CU Selection List for Remote Storage System panel.
Table 16 Contents of the CU Selection List for Remote Storage System Panel
Description Item
DAD ID to which the CU belongs Device Address Domain
Description of the storage system to which the CU belongs Description
Serial number of the storage system to which the CU belongs Storage System S/N
Model of the storage system to which the CU belongs Model
Microcode information for the storage system to which the CU belongs uCode
Interface version of the storage system to which the CU belongs IFType
Setting for use of the copy type by the storage system:
•
Y
— Copy type can be used.
•
N
— Copy type cannot be used.
CA Software Keys
CAA
BC
CAJ
Specify an action:
•
s
— Displays the CCA Selection List for Remote Storage Array panel which
identifies detailed information about the CU.
•
e
— Displays the Edit Device Number for CU panel used to assign a dummy
device number to the CU.
AC
Control unit number CU
SSID of the CU SSID
Dummy device number assigned to the start device (the device with the lowest
CCA) in the CU Dummy Devn
Display when dummy device number not assigned to CU-
NOTSET
Information
If any of the volumes detected in a remote scan or NG scan has not been assigned a dummy
device number (that is, if
NOTSET
is displayed under Information for any volume), the CU Selection
List for Remote Storage Array panel cannot be closed. In such cases, pressing F3=Exit generates
an error message.
If a command device is not contained within the scanned range specified in the Scan Remote
Device Address Extent panel, the dummy device numbers are not assigned to the command devices.
For example, the CU Selection List for the Remote Storage System panel that is displayed after the
36 ISPF Panels