HP P9000, Reference Manual

Page: 269 / 399

nop;
/*
* Wait until all copy pairs in TCS copy group get fully dissolved.
*/
address TSO "YKEWAIT STEM(DEMO_INFO.) MSG(DEMO_MSG.) GOTO(SIMPLEX)",
"TIMEOUT(30)";
/*
* Check to see if the return code is 0 or not.
*/
if rc /= 0
then do
call printErrorMessage;
exit;
end;
else
nop;
call printCopyGroupStatus;
say "#-- END YKDEMO01."; /* The sample script completed. */
exit;
/*
* printErrorMessage: This procedure prints all of the error messages
* in the Message structure when a CLI command failed.
*/
printErrorMessage: procedure expose DEMO_MSG.
do x = 1 to DEMO_MSG.0
say "Severity = " || DEMO_MSG.x.Severity;
say "Text = " || DEMO_MSG.x.Text;
say "Value = " || DEMO_MSG.x.Value;
end;
return 0;
/*
* printCopyGroupStatus: This procedure prints the status information
* of copy pairs in the copy group "MYTCS".
*/
printCopyGroupStatus: procedure expose DEMO_INFO.
say DEMO_INFO.ID || " -- status information."
say " Simplex pairs = " || DEMO_INFO.SimplexCt;
say " Duplex pairs = " || DEMO_INFO.DuplexCt;
say " Suspend pairs = " || DEMO_INFO.SuspendOpCt;
return 0;
YKDEMO02
/* REXX */
/**********************************************************************/
/* */
/* All Rights Reserved. Copyright (C) 2007, 2010, Hitachi, Ltd. */
/* */
/**********************************************************************/
/* */
/* YKDEMO02 - A sample demonstration script that illustrates how to */
/* use the Business Continuity Manager's REXX CLI commands for */
/* linkage with FlashCopy. */
/* */
/* This sample script uses the following CLI commands. */
/* - YKFCSTAT */
/* - YKSLEEP */
Command details 269