HP P9000, Reference Manual

Page: 323 / 399

</CDEVGRP>
</APIInfo>
Example Contents of Path Set Definition File
An example of the contents of the path set definition file, prefix
.PATH.
path-set-id, is shown:
<?xml version="1.0" encoding="ebcdic-cp-us"?>
<APIInfo Level="6.0.1">
<Paths ID="PATHSET.ID">
<CUPath Shared="N"
PriSerialNum="11111" PriModel="9900V" PriIFType="0405"
PriSSID="1234" PriCUNum="00" PriCCA="00"
SecSerialNum="22222" SecModel="9900V" PriIFType="0405"
SecSSID="5678" SecCUNum="00" SecCCA="00"
>
<Ports Direction="FORWARD">
<Port PriPort="00" SecPort="00" />
<Port PriPort="01" SecPort="01" />
<Port PriPort="02" SecPort="02" />
<Port PriPort="03" SecPort="03" />
<Port PriPort="04" SecPort="04" />
<Port PriPort="05" SecPort="05" />
<Port PriPort="06" SecPort="06" />
<Port PriPort="07" SecPort="07" />
</Ports>
</CUPath>
<DKCPath Shared="Y"
PriSerialNum="ABCD1" PriModel="USPV" PriIFType="2020"
PriPathID="00"
SecSerialNum="FGHK2" SecModel="USPV" SecIFType="2020"
SecPathID="00"
>
<Ports Direction="FORWARD">
<Port PriPort="00" SecPort="00" />
</Ports>
<Ports Direction="REVERSE">
<Port PriPort="01" SecPort="01" />
</Ports>
</DKCPath>
</Paths>
</APIInfo>
About REXX Variable Structures
The XML format configuration files in “XML Document Type Definitions” (page 308) are loaded to
the REXX variable structures by
YKLOAD
command that Business Continuity Manager processes
with the REXX variable structure. This section describes the REXX variable structures used in Business
Continuity Manager. To code REXX script, consult the descriptions of the REXX variables in this
section as necessary.
NOTE: In this manual, REXX variables and their contents use characters that are defined in the
U.S. code page (037). If you use a code page other than 037, correct values might not be acquired
or displayed.
Copy Group Structure
The copy group structure is created by the
YKLOAD
command based on XML-format configuration
files.
About REXX Variable Structures 323