manualshive.com logo in svg

HP OMNIBOOK 3000, Reference Manual

Share
Download
HP OMNIBOOK 3000 Reference Manual Download Page 118

Specifications and Regulatory Information

Hardware Specifications

9-4

Input/Output

Universal Serial Bus (USB).
9-pin, 115,200-bps serial (16550 UART).
25-pin bi-directional ECP/EPP parallel.
Video-out (up to 1024 × 768 × 64K colors) at up to 75-Hz refresh rate.
PS/2 keyboard/mouse.
4-Mbps IrDA-compliant infrared.

Expandability

One Type III or two Type II 16-/32-bit PC Card slots.
CardBus enabled.
Plug-in module bay for accessory modules.
Optional port replicator with two USB, serial, parallel, video-out (up to 1024 ×
768 × 64K colors), keyboard, PS/2 mouse, audio, MIDI/joystick, and power-in
ports.

Preinstalled
Software

Microsoft Windows 95.
Windows 95-compatible Plug and Play.
Advanced Power Management (APM 1.2).
DMI 1.1 under Windows 95 with HP TopTools.
Online documentation.
OmniBook Recovery CD-ROM included.
Centralized worldwide BIOS and driver update service.

Windows NT
Support

Windows NT 4.0 certified.
APM 1.2 and PC Card Plug-and-Play support for Windows NT 4.0.

Security Features

Password protection.
DMI-accessible electronic serial number.
Kensington Microsaver lock slot.

Environmental
Limits

Operating temperature: 5 to 35 ºC (41 to 95 ºF).
Operating humidity: 20 to 90 percent RH (5 to 35 ºC).
Storage temperature: –20 to 50 ºC (–4 to 122 ºF).

Summary of Contents for OMNIBOOK 3000






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands