manualshive.com logo in svg

HP OMNIBOOK 3000, Reference Manual

Share
Download
HP OMNIBOOK 3000 Reference Manual Download Page 113

Troubleshooting

Solving Problems

8-13

Serial and Parallel Problems

If the serial mouse doesn’t work

 • 

First, make certain you followed the manufacturer’s installation instructions
completely and everything necessary to install the mouse properly.

 • 

Make sure the serial port option of the setup program is set to the same port that
is selected for the mouse driver.

 • 

Set the mouse device driver to the corresponding COM port which is selected for
the serial port option.

 • 

Check the port connection (may be loose).

If a serial modem doesn’t work properly

 • 

In Windows Help use the modem troubleshooter.

 • 

Check the port connection (may be loose).

If an I/O card stops communicating properly

 • 

It may have been reset if the OmniBook suspended or turned off. Exit and restart
the application.

If the serial or parallel port is not working

 • 

Check settings in BIOS Setup (under System Devices). Make sure that Parallel
and Serial are enabled.

 • 

Check the port connection (may be loose).

Summary of Contents for OMNIBOOK 3000






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands