HP OMNIBOOK 3000 Reference Manual Download Page 102

Page: 102 / 133

8-2

Troubleshooting

If you run into problems with your OmniBook, you can use the suggestions in this
chapter for getting back on track.

If you have questions that this manual doesn’t answer, you can

•

Look at the online Help for Windows and other applications.

•

Find technical information about the OmniBook on the Internet—visit the
Support website at http://www.hp.com/go/omnibook.

•

See other books about Windows, MS-DOS, and other applications. Check your
local library or bookstore.

•

Contact your dealer, or contact Hewlett-Packard—see the OmniBook

Support

and Service

booklet or OmniBook Support in the online OmniBook Library.

Get information about system resources (interrupts, addresses, and memory)—see
“Software System Resources” on page 9-5.

Summary of Contents for OMNIBOOK 3000






































































































































Search results

Summary of Contents for OMNIBOOK 3000

Reviews:

Brands by name

Popular brands

HP OMNIBOOK 3000, Reference Manual

Search results

Summary of Contents for OMNIBOOK 3000

Reviews:

Brands by name

Popular brands