HP nx9100 - Notebook PC Hardware Manual Download Page 121

Page: 121 / 165

7–8

Hardware Guide

Modem and Network Connections

To connect to a LAN:

1. Check that the existing LAN supports Ethernet

10BASE-T/100BASE-TX connections.

2. Plug the purchased network cable into the notebook

RJ-45 jack

3. Plug the other end into the LAN network jack

4. Windows automatically detects and sets up a LAN

connection. To edit settings, open Network Connections in
Control Panel.

Two lights on the RJ-45 jack indicate the connection status

■

The yellow light indicates network activity.

■

The green light indicates that a link is present.

Connecting an RJ-45 network cable

Summary of Contents for nx9100 - Notebook PC






































































































































































Search results

Summary of Contents for nx9100 - Notebook PC

Reviews:

Related manuals for nx9100 - Notebook PC

Brands by name

Popular brands

HP nx9100 - Notebook PC, Hardware Manual

Search results

Summary of Contents for nx9100 - Notebook PC

Reviews:

Related manuals for nx9100 - Notebook PC

Brands by name

Popular brands