Chapter 2
System Information
11
Accessory Board Guidelines
The HP Netserver LP 2000r provides up to three 33 MHz, 32/64 bit, 5V PCI slots which are located on an
extension board.
Tested PCI Boards
For a list of tested PCI boards, check for compatibility under the Hardware Tested Products list for the HP
Netserver LP 2000r under the Service and Support topic for the specific NOS used in the Netserver at HP’s
web site:
http://www.hp.com/netserver/support/compatibility
CAUTION
Some accessory board outputs may exceed U.S. National Electrical code (NFPA
70) Class 2 or limited power source limits and must use appropriate inter-connecting
cabling in accordance with the National Electrical Code. (All HP boards comply with
Class 2.)
IRQ Settings
The IRQ settings are automatically assigned and don't require user intervention. The HP Netserver uses the
Plug-and-Play feature of the PCI boards to correctly assign its resources automatically.