manualshive.com logo in svg

HP MSA 30, User Manual, Page: 31 / 53

Share
Download
HP MSA 30 User Manual Download Page 31

Installing the System in a Rack 

HP StorageWorks Modular Smart Array 30 User Guide 

2-13 

  

HP CONFIDENTIAL 

Writer: Susan Caesar File Name: c-ch2 Installing the System in a Rack.doc 

Codename: NorthStar Part Number: 335900-002 Last Saved On: 10/2/03 3:49 PM 

 

Table 2-3:  Interpreting the Drive Status LED Illumination Patterns  

Activity 
LED (1)  

Online 
LED (2) 

Fault 
LED (3) 

Interpretation 

On, off, or 
blinking 

On or off 

Blinking 

A predictive failure alert has been received for this drive. 

Replace the drive as soon as possible.  

On, off, or 
blinking 

On 

Off 

The drive is online and is configured as part of an array. 

If the array is configured for fault tolerance and all other 
drives in the array are online, you may replace the drive. 

On or off 

Blinking 

Off 

The drive is rebuilding or undergoing capacity expansion. 

Do not remove the drive. Removing a drive could 
terminate the current operation and cause data loss. 

On 

Off 

Off 

The drive is being accessed, but (1) it is not configured as 
part of an array, (2) it is a replacement drive and rebuild has 
not yet started, or (3) it is spinning up during the POST 
sequence. 

Do not remove the drive. Removing a drive could cause 
data loss. 

Blinking 

Blinking 

Blinking 

Either (1) the drive is part of an array being selected by an 
array configuration utility or (2) Drive Identification has been 
selected in Insight Manager. 

Do not remove the drive. Removing a drive could cause 
data loss in non-fault-tolerant configurations. 

Off 

Off 

On 

The drive has failed and been placed offline. 

You may replace the drive. 

Off 

Off 

Off 

Either (1) the drive is not configured as part of an array; (2) 
the drive is configured as part of an array, but a powered-up 
controller is not accessing the drive; or (3) the drive is 
configured as an online spare. 

If the drive is connected to an array controller, you may 
replace the drive online. 

 

Summary of Contents for MSA 30






















































Reviews:

No comments