HP MSA 30, User Manual, Page: 22 / 53

Installing the System in a Rack
2-4 HP StorageWorks Modular Smart Array 30 User Guide
HP CONFIDENTIAL
Writer: Susan Caesar File Name: c-ch2 Installing the System in a Rack.doc
Codename: NorthStar Part Number: 335900-002 Last Saved On: 10/2/03 3:49 PM
3.
Slide the front end of the left rack rail toward the inside front of the rack until the
scissor-type locking latch engages with the rack upright.
4.
Confirm that the rail pins extend through the U-holes that were marked in step 1.
If this is not the case, repeat step 3.
5.
Extend the back end of the left rack rail toward the inside rear of the rack until
the scissor-type locking latch engages with the rack upright.
6.
Confirm that the rail pins extend through the U-holes that were marked in step 1.
If this is not the case, repeat step 5.