manualshive.com logo in svg

HP Model 715/100 - Workstation, Handbook

Share
Download
HP Model 715/100 - Workstation Handbook Download Page 75

Troubleshooting

4–21

Verifying the System Operation with SupportWave 

SupportWave contains the Support Tools Manager to verify system operation.

You can access the Support Tools Manager while in a terminal window; if you are
using HP–VUE as your interface, you can also access the Support Tools Manager
through the sys_admin directory.

Three interfaces are available with the Support Tools Manager: a command–line
interface (accessed through the cstm command), a menu interface (accessed through
the mstm command), and the graphical user interface (accessed through the xstm
command)

To invoke the command–line interface, type the following in a terminal window:

# cstm  

Return

The following screen appears:

********************************************************************************

******

******

******

SUPPORT TOOLS MANAGER

******

******

******

******

Command Line Interface

******

******

******

******

Version  x.xx.xx

******

******

******

******

Part Number  xxxxx–xxxxx

******

******

******

******

(C) Copyright Hewlett Packard Co. xxxx

******

******

All Rights Reserved

******

******

******

********************************************************************************

Please Wait. System mapping in progress . . .

Please type HELP or ? to list available commands.

CSTM>

At the 

CSTM>

 prompt, you can enter several commands. To see what commands are

available, type the help command.

To verify the system operation, type the following:

CSTM>

 verify all  

Return

Summary of Contents for Model 715/100 - Workstation























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands