HP Model 715/100 - Workstation, Handbook

Page: 51 / 150

3–20 Configuration
The workstation is now searching for devices that may hold file systems from
which it can boot HP–UX. As they are found, they appear in a list similar to
the following example:
Device Selection Device Path
Device Type
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
P0 scsi.6.0
QUANTUM LPS525s
P1 scsi.5.0
QUANTUM LPS525s
P2 scsi.2.0
TOSHIBA CD–ROM DRIVE:XM
11. The following list of actions appears:
b) Boot from specified device
s) Search for bootable devices
a) Enter boot administration mode
x) Exit and continue boot sequence
?) Help
Select from menu:
Press a
Return
The following prompt appears:
BOOT_ADMIN>
12. Set the default console to the CRX graphics option by entering the following
command line:
BOOT_ADMIN>
path console graphics_2
Return
13. Enter the following command:
B
OOT_ADMIN>
exit
Return
14. Power off the workstation and the monitor.
15. Connect the color monitor to the CRX graphics connector as shown in Chap-
ter 1 of this manual.
16. Power on the monitor and the workstation.