HP Model 715/100 - Workstation, Handbook

Page: 33 / 150

3–2 Configuration
System SCSI Drive(s)
1st Winchester Drive (if present, uses SCSI ID 6)
2nd Winchester Drive (if present, uses SCSI ID 5)
Floppy Disk Drive* (if present, uses SCSI ID 0)
CD–ROM Drive (if present, uses SCSI ID 2)
External SCSI HP 6000 Series 660A Disk Subsystem,
1st Winchester Drive (ID No. 4)
2nd Winchester Drive (ID No. 3)
3rd Winchester Drive (ID No. 0)
4–mm DDS Tape Drive (ID No. 3)
Magneto–Optical Drive (ID No. 0)
Magneto–Optical Drive (C1701A) (ID No. 0)
External SCSI HP Standalone
Product No. C2213A (These are not default IDs as shipped –
Internal System Drives:
External Device Drives:
CD–ROM Drive (A1999A) (ID No. 2)
600–MB CD–ROM (ID No. 2)
20–GB Magneto–Optical Autochanger (C1700A)
1
st
(ID No. 3)
2
nd
(ID No. 4)
3
rd
(ID No. 5)
you must set the IDs to the correct setting.)
4–mm DDS Tape Drive (if present, uses SCSI ID 3)
*Model 715/64, 715/80, 715/100, and 715/100XC workstations have a PC–
style floppy and do not use a SCSI address for the floppy drive.
Figure 3–1. Default SCSI IDs
NOTICE:
These SCSI IDs are the recommended IDs for each
storage device. If an existing device already uses an
ID, select an alternate ID.