manualshive.com logo in svg

HP LaserJet 4250, User Manual

Share
Download
HP LaserJet 4250 User Manual Download Page 188

Warranty, Regulatory, and Licensing Information

Links within this page:

 

Hewlett-Packard Limited Warranty Statement

 

Regulatory Compliance

 

Declaration of Conformity

 

Trademarks and Copyrights
HP Software License
HP Limited Warranty/Limitation of Liability
Software Copyright Notices
Other Software Licenses

Hewlett-Packard Limited Warranty Statement

HP Product

Duration of Limited Warranty

HP Print Server Appliance 4250 (J7941A) 1 year

1.  HP warrants to you, the end-user customer, that HP hardware, accessories, and supplies will be free from 

defects in materials and workmanship after the date of purchase, for the period of one (1) year. If HP 

receives notice of such defects during the warranty period, HP will, at its option, either repair or replace 

products that prove to be defective. Replacement products may be either new or equivalent in performance 

to new.

2.  HP warrants to you that HP software will not fail to execute its programming instructions after the date of 

purchase, for a period of NINETY (90) DAYS, due to defects in material and workmanship when properly 

installed and used. If HP receives notice of such defects during the NINETY (90) day period, HP will replace 

software that does not execute its programming instructions due to such defects.

3.  You are responsible for restoring any configuration or data. In no event will HP or its affiliates, 

subcontractors, or suppliers be liable for any of the following: damages for loss of data, or software 

restoration; damages relating to Customer's procurement of substitute products or services (i.e., "cost of 

cover"); or incidental, special or consequential damages (including downtime costs or lost profits).

4.  The remedies herein are the customer's sole and exclusive remedies.

5.  HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, 

within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled 

to a refund of the purchase price upon prompt return of the product.

6.  HP products may contain remanufactured parts equivalent to new in performance or may have been subject 

to incidental use.

7.  Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, 

Summary of Contents for LaserJet 4250
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands