HP LaserJet 4250 User Manual Download Page 174

Page: 174 / 223

HP LaserJet print jobs

are missing text of

graphics, or are printing

garbage.

It is strongly recommend that the PSA's firmware be

upgraded

to latest

(2.4.x or newer) to alleviate problems with printer drivers.

Click here to

download the latest firmware for the PSA.

Remove the printer driver from the PSA and from any computer printing

to that printer. Download the latest printer driver form the HP Web site

and install it on the PSA.

The Xerox Document

Center 265ST fails to

print from the PSA. Print

jobs hang in the queue.

These Xerox printers use their own print server cards that require the

remote name to be

(in lower case only). In

Printer Properties

Other print server

must be selected. The

Remote Queue Name

must

(lower case).

I'm unable to see any

advanced printing

options in the Print

Preferences pages on 2K

or XP clients.

Newer Windows 2K and XP drivers now use a new print driver

architecture. This new architecture is not compatible with the PSA

firmware 2.3.252 or older. Upgrade the PSA firmware to 2.5.XX and

reload the 2K/XP printer driver. Select the option "Use client side

rendering".

I am having problems

printing advance features

like Watermark, N-up,

Rotate 180*, back to

front, Booklet...or other

advanced printing

features.

Newer Windows 2K and XP drivers now use a new print driver

architecture. This new architecture is not compatible the PSA firmware

2.3.252 or older. Upgrade the PSA firmware to 2.5.x and reload the 2K/

XP printer driver. Select the option "Use client side rendering".

Printer Driver Problems

Num.

Condition

Possible Cause/Solution

I can't install the

Windows 9x driver for a

printer for which I

already have a Windows

NT, 2K, or XP driver

installed.

Your Windows 9x driver may not have the same name in its .inf file as

the Windows NT, 2K, or XP drivers. Please

contact HP support

I am using Internet

Explorer 6 and am trying

to install and initialize a

driver. I keep getting a

message about Java

having to be turned on.

How do I do this?

Before drivers can be installed, Java must be installed and JavaScript

enabled in your web browser. JavaScript can be enabled in Internet

Explorer, under:

Internet Options-->Security (tab)-->Custom Level (button)-->Scripting--

>Scripting of Java Applets (subheading)

If a Java virtual machine is not installed in the browser, refer to Sun

Microsystem's web site or to Microsoft's web site for information about

downloading one. Then make sure the virtual machine is turned on. In

Internet Explorer, go to:

Internet Options-->Security (tab)-->Custom Level (button)-->Microsoft

Select any option other than "disable".

Summary of Contents for LaserJet 4250
































































































































































































































Search results

Summary of Contents for LaserJet 4250

Reviews:

Brands by name

Popular brands

HP LaserJet 4250, User Manual

Search results

Summary of Contents for LaserJet 4250

Reviews:

Brands by name

Popular brands