HP LaserJet 4250 User Manual Download Page 176

Page: 176 / 223

Security Problems

If the PSA is joined to a domain, the domain password for the domain controller is included in the backup file. When

that PSA backup file is

restored

, it might be necessary to join the PSA to that domain again because the password

might have changed since the backup file was created.

About the Indicator Lights (LEDs)

There are four indicator lights (LEDs) on the front of the PSA.

LED Normal Conditions

LED

LED Name

Description

Power LED

ON when power is supplied to the PSA and it is turned on.

Network

Activity

LED

LIT when there is a connection between the PSA and other

network devices.

BLINKS when there is network activity between the PSA and

other network devices.

Disk

Activity

LED

ON when there is disk activity on the PSA.

Alert LED

OFF during normal operations (ON during bootup and shutdown).

LED Problem Conditions

Condition

Possible Cause/Solution

Power

LED is not lit.

Power failure. Restore AC power. Bad power cord or power cord

unplugged. Verify and replace cord.

Network

LED never

blinks.

Network connection is bad. Verify network cable connections, replace

cable.

Alert

LED remains

lit after bootup is

completed.

Critical failure is detected. Note the message on LCD front panel.

Power cycle the unit. If the problem persists,

contact HP support

Summary of Contents for LaserJet 4250
































































































































































































































Search results

Summary of Contents for LaserJet 4250

Reviews:

Brands by name

Popular brands

HP LaserJet 4250, User Manual

Search results

Summary of Contents for LaserJet 4250

Reviews:

Brands by name

Popular brands