manualshive.com logo in svg

HP LaserJet 4250, User Manual

Share
Download
HP LaserJet 4250 User Manual Download Page 120

●

     

network problems (cable malfunction, hub, or router problems)

●

     

not on the network

●

     

the IP address or host name specified is not a domain controller

●

     

power is disconnected or interrupted

Action:

●

     

Retype the WINS server address in the xxx.xxx.xxx.xxx format on Microsoft 
Network Settings page and try again.

A properly configured WINS server is essential for the proper operation of the 
PSA. If the PSA cannot reach the WINS server, users on other subnets (on the 
other side of a router) will not be able to see the PSA in Network Neighborhood.

●

     

If the DNS server, WINS server, or Domain Controller is not on the same subnet as 
the PSA, ensure that the TCP/IP configurations, as entered on the 

TCP/IP and 

DNS

 page (in the web interface under Networking), are configured correctly and 

that the network infrastructure, such as the default gateway, is configured and is 
operational.

Failed WINS name resolution (210)

Level: Error

Category: Networking

Description: The PSA could communicate with the WINS server but could not resolve 
the name. A properly configured WINS server is essential for the proper operation of the 
PSA. If the PSA cannot use the WINS server to resolve IP addresses, it will not be able to 
communicate with the device.

Action: The NT Domain Name might have been misspelled on the 

Microsoft Network 

Settings

 page (in the web interface under Networking).

Make sure the network has a WINS server configured and the WINS server address on the 

Microsoft Network Settings

 page is correct. Make sure the WINS server has an entry for 

the device being looked up.

For example, if the WINS server does not reply with the IP address of a Domain 

Summary of Contents for LaserJet 4250
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands