background image

8VHU·V*XLGH

²

8

Using Wi-Fi

<Exact settings and user interface subject to change. More 
information to come.>

Getting Acquainted

With wireless access, you do not need to use cables to connect 
your HP iPAQ to the Internet. Instead, access points transmit data 
to and from your wireless device. Your HP iPAQ can connect to 
an 802.11b WLAN or connect directly to other WLAN-enabled 
devices. With Wi-Fi, you can:

Access the Internet

Send and receive e-mail

Access corporate network information

Use virtual private networks (VPNs) for secure remote access

Use hotspots for wireless connectivity

Note:

Use of dial-up and wireless Internet, e-mail, corporate 

networks, and other wireless communications, such as 
Bluetooth-enabled devices, may require separately purchased 
additional hardware and other compatible equipment, in addition 
to a standard Wi-Fi infrastructure and a separately purchased 
service contract. Check with your service provider for availability 
and coverage in your area. Not all web content may be available. 
Some web content may require installation of additional software.

Summary of Contents for iPAQ hx2000 Series


















































































































































































Reviews: