8VHU·V*XLGH
²
8VLQJ:L)L
Changing TCP/IP Settings
Note:
Most Internet Service Providers (ISPs) and private
networks now use dynamically-assigned IP addresses. You will
not need to change the Transmission Control Protocol/Internet
Protocol (TCP/IP) settings unless your ISP or private network
does not use dynamically-assigned IP addresses. If you are not
sure if your ISP or private network use dynamically-assigned IP
addresses, check with your network administrator.
To change TCP/IP Settings:
1. Contact your ISP or network administrator to determine your
IP address, subnet mask, and/or default gateway (if needed).
2. Be sure Wi-Fi is on.
3. From the
iPAQ Wireless
screen, tap >
Settings
>
Network
Adapters
tab.
4. In the
My network card connects to...
dropdown box, tap
either
The Internet
or
Work.
Note:
If you are connecting to your ISP at home, tap
The
Internet.
If you are connecting to a private network, such as a
corporate network at work, tap
Work.
5. In the
Tap an adapter to modify settings
box, tap
HP iPAQ
Wi-Fi Adapter.
6. Tap the
IP Address
tab.
7. Tap
Use specific IP address
and enter the requested
information.
8. Tap
OK
to save your settings.