HP iPAQ hx2000 Series Page 98 User Manual Download

Page: 98 / 177

8VHU·V*XLGH

$SSOLFDWLRQV

To backup/restore using iPAQ Backup:

1. From the

Start

menu, tap

or tap

Programs

iPAQ

Backup.

2. Tap the

Backup

tab or the

Restore

tab.

3. Select the files and folders to be backed up or restored.

4. Select file location for backed-up data.

5. Set backup or restore options and press

OK.

6. Press the

Backup

Restore

button, and then press the

Start

button on the next screen.

Using ActiveSync To Backup/Restore

Close all programs on your iPAQ Pocket PC before backing up or
restoring your information.

CAUTION:

Restoring your information replaces the current information

on your iPAQ Pocket PC with the information saved in your backup.

To backup/restore using ActiveSync:

1. Connect the iPAQ Pocket PC to your computer.

2. From your computer, open

Microsoft ActiveSync

3. From the

Start

menu, tap

Programs

Microsoft ActiveSync.

4. From the

Tools

menu, click

Backup/Restore.

5. Click the

Backup

Restore

tab, and select your options.

6. Click

Backup Now

Restore Now.

Summary of Contents for iPAQ hx2000 Series


















































































































































































Search results

Summary of Contents for iPAQ hx2000 Series

Reviews:

Related manuals for iPAQ hx2000 Series

Brands by name

Popular brands

HP iPAQ hx2000 Series, User Manual

Search results

Summary of Contents for iPAQ hx2000 Series

Reviews:

Related manuals for iPAQ hx2000 Series

Brands by name

Popular brands