manualshive.com logo in svg

HP iPAQ hx2000 Series, User Manual, Page: 20 / 177

Share
Download
HP iPAQ hx2000 Series User Manual Download Page 20

8VHU·V*XLGH

²

*HWWLQJWR.QRZ<RXUL3$43RFNHW3&

Aligning the Screen

When the iPAQ Pocket PC is turned on for the first time, you are 
guided through a screen alignment process. You must realign 
your screen if:

■

The Pocket PC does not respond accurately to your taps.

■

You perform a full reset of your Pocket PC.

To realign the iPAQ Pocket PC screen:

1. From the 

Start

 menu, tap 

Settings

 > 

System

 tab > 

Screen 

icon.

2. Tap the 

Align Screen

 button.

Shortcut:

To access the 

Align Screen

 application without 

tapping on the screen, press and release all four application 
buttons at the same time. 

[Verification to come.]

3. Tap the cross-hair object at each location. Be precise when 

tapping the cross-hair object.

4. Tap 

OK.

Using the Touchscreen

[Information to come.]

Summary of Contents for iPAQ hx2000 Series


















































































































































































Reviews:

No comments