*HWWLQJWR.QRZ<RXUL3$43RFNHW3&
8VHU·V*XLGH
²
Setting a Password
You can set a password to prevent unauthorized access to or use
of your Pocket PC.
1. From the
Start
menu, tap
Settings > Personal
tab >
Password.
2. On the Password screen, tap the box next to
Prompt if device
unused for
, and then set the amount of time allotted to pass
before the Pocket PC prompts the user for a password.
3. Tap the list box to select
Simple 4 digit password
or
Strong
alphanumeric password.
4. Enter your password in the Password box using the screen
keyboard and tap
OK.
NOTE:
Keep a record of your password in a safe place in case you
forget it. If you are unable to retrieve your password, you must
perform a hard reset on your Pocket PC and will lose settings and
information that are not saved in iPAQ File Store. See the section
in this chapter “Performing a Hard Reset” for more information.
Resetting the Unit
Sometimes there is a need to reset your Pocket PC. Resetting the
unit is known as performing a “soft” or “hard” reset. A soft reset
(also known as a normal reset) stops all running applications, but
does not erase any programs or saved data.
A hard reset (also known as a full reset) is used when you want to
clear all user-installed settings, programs, and data from the
Read-Only Memory (ROM). By performing a hard reset, you
return the device to its original shipping state.
