manualshive.com logo in svg

HP iPAQ hx2000 Series, User Manual, Page: 65 / 177

Share
Download
HP iPAQ hx2000 Series User Manual Download Page 65

8VLQJ6HFXULW\)HDWXUHV

8VHU·V*XLGH

²

2. Enter your PIN and the device unlocks.

Note:

 If you do not remember your PIN, you can tap 

Forgot PIN

in the lower left corner of the screen to enter your password 
instead.

■

If you enter an incorrect PIN, the message "Invalid PIN 
entered" appears. Enter your PIN again.

■

If you do not enter the correct PIN within three attempts, the 
password screen appears. 

Logging in Using Your Password

To login using your Password:

1. Enter your password and tap 

OK.

A message appears, indicating that you authenticated 
successfully.

2. Tap 

OK.

If you entered the incorrect PIN, you will be prompted to create a 
new PIN. 

Note:

If you do not remember your password, you can tap 

Forgot 

Password

 in the lower left corner of the screen to answer your 

hint question instead.

■

If you enter an incorrect password, the message "Invalid 
Password entered" appears. Enter your password again.

■

If you do not enter the correct password within the configured 
number of attempts, the question/answer screen appears.

Summary of Contents for iPAQ hx2000 Series


















































































































































































Reviews:

No comments